How to Fix Dual Security Issues on Redmi Note 12 4G (tapas) with Locked Bootloader and Any Miui or HyperOS Version
- First, connect your phone to the Diag Port (DFT) and save the QCN file.
- Next, remove the resistor from the motherboard.
- If your phone is running any Miui version (except HyperOS), then flash the latest Miui version with Auth Flash. Do not disconnect the cable after flashing. Erase the EFS partition with DFT EDL mode. Connect to the Diag Port again and restore the QCN file. This will fix the dual security problem.
- If your phone is running the latest HyperOS version with high security, then flash the ENG firmware with Auth Flash. Do not disconnect the cable after flashing. Erase the EFS partition with EDL mode. Enable the Diag Port and restore the QCN file. Check the network signal.
- Finally, reboot your phone to Fastboot mode and flash the latest HyperOS firmware with Fastboot (DFT Pro). This will complete the process.
Info. | Details |
---|---|
Tool Name | How to Fix Dual Security Issues on Redmi Note 12 4G (tapas) with Locked Bootloader 2024 |
Version | 2024 |
Files Hosted By | https://gsmcracksolution.blogspot.com// |
Conclusion:
if you encounter dual security issues on your Xiaomi/Redmi device, proceed with caution when attempting to address the problem. Start by backing up your important data to prevent potential loss. Verify that any instructions are specific to your device model and software version, and rely on official sources such as Xiaomi/Redmi's website or support channels for accurate information. Understand the implications for your device's warranty before performing any actions that might void it. Assess the risks associated with the procedures, especially if you are not experienced, and consider seeking professional assistance or guidance from official channels if needed. Always prioritize accurate information, and proceed carefully to avoid unintended consequences or damage to your device.